4. Insert the two azimuth shipping restraints
between the edge of the baseplate and the rotating
plate along the side of the antenna frame, as
pictured in Figure 5-15.
5. Pack the TracVision G6 antenna unit in its original
package.
6. As detailed in the warranty accompanying this
product and printed on the last page of this
manual, a Return Material Authorization (RMA)
number is required prior to the return of the
TracVision G6 system to KVH. Please contact the
KVH Technical Support Group at +1 401 847-3327
or via e-mail at techs@kvh.com to obtain an RMA
number. Please review your warranty to
familiarize yourself with all requirements,
liabilities, and policies.
Maintenance
54-0161
123
Figure 5-15
Azimuth Shipping Restraints
Placement
KVH is not liable for damage
caused by improper shipping.
Before returning the product, be
sure to obtain an RMA number
from KVH’s Technical Support
Department and write the
number on the outside of the
box. Shipments received without
an RMA number will be returned
to you at your expense.
To Next Page
Loading...
Need help?
General
