54-0161
156
TracVision G6 Technical Manual
Azimuth CW Step
Function: commands a manual 0.1° clockwise step in azimuth
angle
Command: 6
Response: echoes the command
Azimuth CCW Step
Function: commands a manual 0.1° counter-clockwise step in
azimuth angle
Command: 4
Response: echoes the command
Elevation UP Step
Function: commands a manual 0.1° UP step in elevation
angle
Command: 8
Response: echoes the command
Elevation DOWN Step
Function: commands a manual 0.1° DOWN step in elevation
angle
Command: 2
Response: echoes the command
G.3 Operational Commands
Tracking Mode
Function: starts active tracking of the satellite
Command: TRACK
Response: echoes the command
Idle Mode
Function: halts active tracking and conical scan, then enters
Idle mode
Command: HALT
Response: echoes the command
Table G-3
Operational Commands
To Next Page
Loading...
Need help?
General
