Antenna Error Messages
At times, the ADCU will display error messages alerting you to a
specific problem (e.g., you have selected an invalid satellite pair).
There are also two general antenna error messages that are not
related to a specific action.
“Antenna response incorrect” (shown in Figure 3-7) indicates that
the ADCU received an incorrect answer from the antenna in
response to a request. The solution to this error is simply to
repeat your requested operation.
“Antenna not responding” (shown in Figure 3-8) indicates that
no messages are being received from the antenna. This is usually
the result of the antenna not being powered up or the antenna
being disconnected from the ADCU.
54-0161
68
TracVision G6 Technical Manual
To Next Page
Loading...
Need help?
General
