To Next Page

To Previous Page

Selecting Active Satellite

These screens are only seen if the GyroTrac ADCU is connected to a

TracVision G6.

After installing the active pair of satellites, use the Select Satellite

menu to choose which of the installed satellites will be active.

Using the ADCU Interface

54-0161

Proceed to "Updating Satellite

Frequency Data"

Select Satellite?

Enter Next Return

Select <SAT NAME A>

Yes Next Cancel

Select <SAT NAME B>

Yes Next cancel

Sat Name A

corresponds to the

first satellite selected

during the Install

Satellite process.

Sat Name B

corresponds to the

second satellite

selected during the

Install Satellite

process.

<SAT NAME A> selected

<SAT NAME B> selected

Figure 3-34

Select Active Satellite

KVH Industries TracVision G6 Technical Manual

Other manuals for KVH Industries TracVision G6