Expanding the Printer Memory
A-5
2
Remove the two screws from the printer’s rear panel.
3
Pull the main circuit board all the way out of the printer.
• Before pulling the main circuit board out, clear away the area behind
the printer. Foreign objects, accidentally sticking to the back of the
main circuit board, can cause serious damage to the printer.
• There are two sockets are provided on the FS-3830N and one socket
on the FS-3820N for expanding the printer's memory. (The extra
32 MB of DIMM memory that come standard with the FS-3830N is
installed in one of the expansion sockets.)
Install the DIMM as described on the following page.
Screws
DIMM Sockets
Note
To Next Page
Loading...
Need help?
General