Printing Test Pages
1-19
Network Interface Status Page
You can print out a status page for the network interface. The network
interface status page shows the firmware version, the network addresses,
and other information under various network protocols about the network
interface card. The default setting is Off (not print). If the setting is
changed to On (print) as follows, however, the network interface status
page will be printed when the printer status page is printed.
Printing out a network interface status page may not be possible with the
option network interface card. For details, see the manual for the network
interface.
1
Press the MENU key.
2
Press the or key repeatedly until Interface > appears.
3
Press the ENTER key. A blinking question mark (?) appears.
NETWORK STATUS PAGE
FS-3830N Page Printer
Note
Interface >
Parallel
Interface
? Parallel
To Next Page
Loading...
