Pagination
1-43
8
Press the or key repeatedly until the desired alternative
emulation appears.
9
Press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Printing KPDL Errors
The printer can print error descriptions when printing error occurs during
KPDL emulation. The default is Off – the printer does not print KPDL
errors.
1
Press the MENU key.
2
Press the or key repeatedly until Emulation > appears.
3
Press the ENTER key. A blinking question mark (?) appears.
4
Select KPDL or KPDL (AUTO) using the or key.
5
Press the ENTER key.
6
Press the > key. The message display changes to that shown below. If
>Alt. Emulation is displayed when the KPDL (AUTO) emulation
is selected, press the or key to change it.
7
Press the ENTER key. A blinking question mark (?) appears.
Emulation
PCL 6
Emulation
?PCL 6
Emulation
?KPDL
>Print KPDL Errs
Off
>Print KPDL Errs
? Off
To Next Page
Loading...
Need help?
General