Operating the Storage Device
1-83
Reading Data
To read data on a CompactFlash card, Microdrive, or the RAM disk use the
following procedure:
1
Press the MENU key.
2
Press the or key repeatedly until Memory Card >, Hard Disk
> or RAM Disk Mode > appears.
3
Press the > key.
4
Press the or key repeatedly until >Read Data appears. The
data name also appears.
5
Press the ENTER key. A blinking question mark (?) appears before
the data name.
6
Press the or key to display the desired data name.
7
Press the ENTER key. Processing appears and the reading of data
from the storage device starts.
Memory Card >
>Read Data
data name
>Read Data
?data name
To Next Page
Loading...
