Printing Test Pages
1-20
4
Press the or key repeatedly until Network appears.
5
Press the ENTER key again. A > appears.
6
Press the > key and then press the or key repeatedly until the
message display indicates >Network Status Page.
7
The default setting is Off. If it is set to On, change it as follows.
Press the ENTER key. A blinking question mark (?) appears.
8
Select On using the or key.
9
Press the ENTER key again.
10
Press the MENU key. The message display returns to Ready.
Interface
? Network
Interface >
Network
>Network Status
Page Off
>Network Status
Page ? Off
>Network Status
Page ? On
>Network Status
Page On
To Next Page
Loading...
