Paper Handling
1-35
Setting the Duplex Path
To use this function, the duplexer must be installed on the printer.
If the paper type is set to Custom and the option duplexer is installed on
the printer, you can set whether or not to enable duplex printing as follows.
The default setting is Enable.
1
Display the custom paper type (see Creating Custom Paper Type
on page 1-32) and press the > key.
2
Press the or key repeatedly until >>Duplex Path appears.
3
Press the ENTER key. A blinking question mark (?) appears.
4
Select Enable or Disable using the or key. For details of the
default setting for each paper type, see Paper Type on page 2-12.
5
Press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
The custom paper type setting is completed.
Option
>>Duplex Path
Enable
>>Duplex Path
? Enable
To Next Page
Loading...
Need help?
General