3
3-5
Basic Operation
ID Card Copy
The procedure for using ID Card copying is explained below.
1
Press the
Copy
key when the
Copy
key/indicator is off.
NOTE:
If the Message Display is turned off, press the any
key on the operation panel and wait for the machine to warm
up.
2
Place the original on the platen.
Put the scanning side facedown in the center of
Statement or A5 size scanning area.
NOTE:
For loading instructions, refer to
Loading
Originals on page 2-59
.
3
Press the
Program 1
.
The ID Card Copy function is recalled.
4
Press the
Start
key. Scanning begins.
5
Turn over the original on the platen and press the
Start
key.
6
After scanning all originals, press [End Scan] (the
Right
Select
key) to start copying.
To Next Page
Loading...
