3
3-21
Basic Operation
Send to Folder (SMB)/Send to Folder (FTP)
Stores a scanned original image file in the specified shared folder of any PC.
Stores a scanned original image in a folder of an FTP server.
NOTE:
• Refer to Help of your operating system for details on how to share a folder.
• Be sure that
SMB Protocol
or
FTP
in the Command Center RX is
On
. For details, refer to the
Command Center
RX User Guide
.
• Refer to
Command Center RX on 2-29
for details on entering characters.
1
Press the
Send
key.
Displays the screen for sending.
2
Place the originals on the platen or in the document
processor.
NOTE:
For loading instructions, refer to
Loading
Originals on page 2-59
.
3
Press the
or
key to select [Folder(SMB)] or
[Folder(FTP)].
4
Press the
OK
key. Host Name(SMB) or Host Name(FTP)
appears.
5
Enter the host name.
NOTE:
Destination can be specified using the Address
Book or the One-touch keys. Refer to
Specifying
Destination on page 3-25
.
6
Press the
OK
key. Path appears.
To Next Page
Loading...
