5-18
Sending Functions
5
Press the
or
key to select [From Oper. Panel].
6
Select the destination computer from the computer list.
Press [Detail] (the
Right Select
key) to see the
information of the selected computer.
7
Press the
OK
key to confirm the destination, and then
press the
Start
key. Transmission starts.
NOTE:
To change the destination computer, press the
Back
key and then press [Yes] (the
Left Select
key). This brings
you back to step 6.
NOTE:
To use WSD Scan from your computer, press [From
Computer] in step 5 and then scan the original from the
computer.
To Next Page
Loading...
