8-174
Default Setting (System Menu)
6
Press the
OK
key. USB Host appears.
7
Press the
or
key to select [Unblock] or [Block].
8
Press the
OK
key.
Completed.
is displayed and the
screen returns to the I/F Block Set. menu.
USB Device (USB interface setting)
This locks and protects the USB interface connector (B1) (USB Device). The default setting is
Unblock
.
Use the procedure below to specify the USB Device setting.
1
In the Sys. Menu/Count. menu, press the
or
key to
select [System/Network], and press the
OK
key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the
Right Select
key).
2
The System/Network menu appears.
3
Press the
or
key to select [I/F Block Set.].
4
Press the
OK
key. The I/F Block Set. menu appears.
5
Press the
or
key to select [USB Device].
To Next Page
Loading...
