Preparation before Use
2-18
2
Display the screen.
3
Click [Express Install].
NOTE: To install Status Monitor, it is necessary to install
Microsoft .NET Framework 4.0 beforehand.
4
You can also select [Use host name for port name] and
set to use the host name of the standard TCP/IP port. (A
USB connection cannot be used.)
NOTE: The machine cannot be detected unless it is on. If
the computer fails to detect the machine, verify that it is
connected to the computer via a network or USB cable and
that it is turned on and click (Reload).
5
Select the package.
The following software will be installed.
• Driver Package
KX Driver, Status Monitor, Fonts
• Scan Package
Kyocera TWAIN Driver
6
Click Install.
NOTE: If the Windows security window appears, click
[Install this driver software anyway].
To Next Page
Loading...
