Kyocera FS-1028MFP - Page 128

2H9
1-5-20
10. Unhook two hooks and then remove the top
cover.
11. Remove the connector.
Figure 1-5-26
12. Release the clamp and then pull out the
wires.
13. Remove four screws and then remove the
laser scanner unit (LSU).
14. Check or replace the laser scanner unit
(LSU) and refit all the removed parts.
Figure 1-5-27
Top cover
Connector
Hook
Hook
Laser scanner unit
Wires
Clamp
Screws
Screws