Introduction
xii OPERATION GUIDE
Accessing Menu Items
When you configure the machine, you do so by accessing a menu item and making
your setting from there. Each configuration instruction in this guide tells you to
access the menu item and provides a route map to direct you to that item. An
example of a route map and its significance is shown below.
.
[Menu] This represents the operation panel button to be pressed.
W or X
Press the left or right button until 1. Common Setup is displayed.
1. Common Setup
[OK]
W or X
Press the left or right button until 12. Paper Size is displayed.
12. Paper Size
[OK]
To Next Page
Loading...
