FAX System Settings
OPERATION GUIDE 5-7
Facsimile Maintenance Settings
Setting value of the facsimile can be changed.
Item Setting Value Description
ECM ECM:Off, ECM:On Determines if ECM
communication is used
or not.
ECM communication
is the function to
automatically resend
the image that has not
been sent due to noise
on telephone line.
Tx Speed 33.6, 31.2, 28.8, 26.4,
24, 21.6, 19.2, 16.8,
14.4, 12, 9.6, 7.2, 4.8,
2.4
Selects the starting
speed on FAX
transmission.
Rx Speed 33.6, 31.2, 28.8, 26.4,
24, 21.6, 19.2, 16.8,
14.4, 9.6, 4.8, 2.4
Selects the starting
speed on FAX
reception.
Speed Display On, Off Determines whether to
display transmission
speed, etc. on the
message display.
Codec Disable MMR, MR, Off Restricts codec to be
used.
MMR: disables MMR.
MR: disables MMR and
MR.
Off: enables MMR,
MR, and MH.
Protocol Report On, Off, Error Determines whether to
print protocol report
automatically.
On: Prints after every
transmission.
Off: Does not print.
Error: Prints in case
of error only.
File Clear - Deletes all the data in
memory.
DRD Pattern Normal Ring, Double
Ring, S-S-L, S-L-S
Selects ringer type for
DRD (Inch model only)
To Next Page
Loading...
