FAX System Settings
OPERATION GUIDE 5-3
Default Settings (image quality and brightness)
Selects the default value of image quality and brightness.
NOTE: For details on image quality and brightness, refer to Sending Documents
on page 3-1.
1 Access 4.Fax Setup.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xii.
2 Press W or X to select, 47. Def. Res. or 48. Def. Bright and press
[OK].
3 Press W or X to select a desired setting value, and press [OK]. The display
returns to the ready screen.
Speaker Volume Setting
Selects the speaker volume when [On-Hook] is pressed, or during communication.
1 Access 49.SPKR Volume.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xii.
2 Press W or X to select, Off, Low, Mid or High and press [OK]. The display
returns to the ready screen.
Item Setting Value Description
47.Def. Res. STD., Fine, S-Fine,
Photo
Default settings of image quality
48.Def. Bright Dark, Normal, Light Default settings of brightness
[Menu]
W or X
4.Fax Setup
[OK]
[Menu]
W or X
4.Fax Setup
[OK]
W or X
49.SPKR Volume
[OK]
To Next Page
Loading...
