Basic Operation
3-2 OPERATION GUIDE
4
Press [Brightness] repeatedly until your
desired brightness is displayed on the
message display.
NOTE: Default setting of the brightness can be changed. For details, refer to
Default Settings (image quality and brightness) on page 5-3.
5
Enter the destination FAX number using the
numeric keys.
• Press W to delete the entered number.
• Press [Redial/Pause] to insert 2-
second pause when dialing the FAX
number.
• Press [] on the numeric keys to
switch to tone dial temporarily if pulse
is selected for the line type. Press
[On-Hook] to switch back to pulse dial again.
• Press [×Shift] to insert F(Flash) if used in Private Branch eXchange(PBX).
NOTE: FAX can be sent to multiple destinations simultaneously. For details, refer
to Broadcast Transmission on page 4-2.
To dial without using the numeric keys, use:
• One-touch dial (Refer to page 3-5)
• Speed dial (Refer to page 3-5)
• Group dial (Refer to page 3-6)
• Manual redial (Refer to page 3-12)
Mode Description
Normal To send in normal brightness
Dark To send pale original in dark color
Light To send dark original (original with background color, etc.) in pale
color
Normal STD.
06/12 20:52
To Next Page
Loading...
