FAX Operation (Basic)
3-4 OPERATION GUIDE
NOTE: Up to 64 digits can be entered as the fax
number of the receiving system.
Use Y or Z to move the cursor.
To correct the number, press the Clear key to
delete the digits one by one before reentering the
number. To delete the number entirely, press the
Reset key.
Address Recall/Pause
Pressing this key adds about three seconds of
waiting time during dialing. For example, when
dialing the receiving system on an external line,
you can use this method to insert a pause before
resuming dialing after you dial a specific number.
Make detailed settings for sending as necessary.
Press [Detail] (the Right Select key) to display the
FAX Detail menu. Press the Y or Z key to select
[Sub Address], [Encrypted TX], [TX Start Speed] or
[ECM] and change settings, and then press the OK
key.
To Next Page
Loading...
