FAX Operation (Basic)
OPERATION GUIDE 3-17
3
method to insert a pause before resuming dialing after
you dial a specific number.
22 Press [Detail] (the Right Select key) and then use
the Y or Z key to select [Sub Address]. If you do
not use Sub Address, proceed to step 28.
23 Press [Edit] (the Right Select key).
24 Use the numeric keys to enter the sub address. Up
to 20 digits can be entered.
NOTE: A sub address can be entered using numerals
from 0 to 9, spaces, and characters "#" and "*".
25 Press the OK key.
26 Use the numeric keys to enter the sub address
password. Up to 20 digits can be entered.
NOTE: A sub address password can be entered using
numerals from 0 to 9, spaces, and characters "#" and
"*".
27 Press the OK key.
28 Use the Y or Z key to select [Encrypted TX]. If you
do not use Encrypted TX, proceed to step 38.
29 Press [Change] (the Right Select key).
30 Press the U or V key to select [On].
31 Press the OK key.
32 Press the U or V key to select the desired
encryption key number.
33 Press the OK key.
To Next Page
Loading...
