FAX Operation (Advanced)
OPERATION GUIDE 4-13
4
NOTE: When using a telephone set that can send
tone signals, use the telephone to start the
reception of originals with the remote switch
function. (Refer to Remote Switch Function on
page 4-14.)
When you hear a voice from the receiving
system
The telephone line has connected to the telephone
of the sending system. When the conversation is
over, follow steps 1 to 2 above.
After the sending system has started transmission,
the machine starts receiving originals.
4 When reception starts (when the Send/Receive
indicator on the operation panel starts blinking),
return the handset to its original position.
To Next Page
Loading...
