FAX Operation (Advanced)
4-20 OPERATION GUIDE
Forwarding Time Setting
Register the start time and end time between which forwarding is enabled.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
4 Press the U or V key to select [Reception].
5 Press the OK key.
6 Press the U or V key to select [Forward Settings].
7 Press the OK key.
8 Press the U or V key to select [Forward Time].
9 Press the OK key.
10 Press the U or V key to select [All day] or [Preset
Time].
11 Press the OK key. Proceed to the next step if you
selected [Preset Time] in step 10.
12 Press the Y or Z key to move the cursor position,
and enter the hours and minutes of the start time.
13 Press the OK key.
14 Press the Y or Z key to move the cursor position,
and enter the hours and minutes of the end time.
15 Press the OK key.
NOTE: Enter the time on the 24 hours system.
File Format Setting (for Each Requirement)
If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF, TIFF,
or XPS as the file format.
1 Press the System Menu/Counter key.
2 Press the U or V key to select [FAX].
3 Press the OK key.
To Next Page
Loading...
