FAX Operation (Advanced)
4-26 OPERATION GUIDE
NOTE: When a sub address has been registered to
the destination of the Address Book, you can use the
destination. When a sub address-registered
destination in the Address Book is used for a One-
touch key, you can also use the One-touch key. In this
case, go to step 9.
3 Use the numeric keys to enter the fax number of the
other party.
4 Press [Detail] (the Right select key).
5 Press the Y or Z key to select [Sub Address], and
press [Edit] (the Right Select key).
6 Enter the sub address using the numeric keys.
NOTE: You can use up to 20 digits including the
numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’ characters to
enter a sub address.
7 Press the OK key and enter the sub address
password using the numeric keys.
NOTE: You can use up to 20 digits including the
numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’ characters to
enter a sub address password. When the machine
receives originals, a sub address password is not used.
8 Press the OK key.
9 Press the OK key again.
10
Press the Start key. Transmission begins.
To Next Page
Loading...
