Kyocera FS-2100DN User Manual

4-97
Operation Panel
7 Press [OK]. The Login Password entry screen is displayed.
8 Enter the Login Password using the numeric keys then press [OK].
The log in screen reappears.
9 Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Security menu screen
appears.
Network Security (Network security setting)
Use this procedure to specify the security settings for each of the network protocols used.
The options available in Network Security are as follows:
• WSD-PRINT (WSD-PRINT setting)...4-98
• Enhanced WSD (Enhanced WSD setting)...4-98
• EnhancedWSD(SSL) (Enhanced WSD (SSL) setting)...4-98
• IPP (IPP setting)...4-99
• SSL Setting (SSL Server setting)...4-99
• IPSec (IPSec setting)...4-102
• ThinPrint (Thin Print setting)...4-102
• LAN Interface (LAN Interface setting)...4-103
1 In the Security menu, press U or V to select Network
Security.
2 Press [OK]. The Network Security menu screen appears.
Note The initial setting for the administrator's Login
Password is "Admin".
For details on entering characters, refer to Character Entry
Method on page A-2.
Login Password: a b
*
ABC
[ Text ]
Login User Name: O b
Admin
Login Password:
/******************-
[ Login ]
●●●●●
Security: a b
********************-
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Security
IMPORTANT Check with your network administrator when selecting network settings.
Network Security: a b
********************-
2 Enhanced WSD
3 EnhancedWSD(SSL)
[ Exit ]
1 WSD-PRINT

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s