Document Box
5-18
Print a File (Changes to the print settings)
To change the print settings for a file selected in a Custom Box and print it.
1 In the file list screen, select the item and press [OK]. The Print/
Delete menu screen appears.
2 Press U or V to select Print(ChangeSet).
3 Press [OK]. The Copies menu screen appears.
If you want to change the number of remaining copies to be printed,
use the numeric keys or press U or V to set the number of copies to
be printed.
4 Press [OK]. The Paper Source menu screen appears.
5 Press U or V to select the tray containing the paper you want to use.
6 Press [OK]. The message Accepted. appears and printing begins.
When On is selected in the Del. afterPrint (Setting for file deletion after
printing) on page 5-11, the selected file will be deleted from the
Custom Box after it is printed.
Print Function Settings
When printing, the print settings can be changed.
Options available in Print Function Settings are as follows:
• Duplex (Setting the duplex printing)...5-19
• EcoPrint (Selecting the EcoPrint mode)...5-19
• File Name Entry (entering a file name)...5-20
• JobFinish Notice (Settings for notification when jobs are finished)...5-20
• Del. after Print (Delete data after printing setting)...5-21
Note If Job Accounting is enabled, enter the account ID in the
login screen that appears. The Copies menu screen appears
after login.
[Function] ([Right Select]) can be pressed to change the print
settings. For details, refer to Print Function Settings on page 5-18.
To Next Page
Loading...
Need help?
General
