Kyocera FS-2100DN User Manual

2-23
Preparation before Use
4 Turn the Paper Size Dial so that the size of the paper you are going
to use appears in the Paper Size Window.
5 Adjust the position of the paper width guides located on the left and
right sides of the cassette. Press the paper width adjusting tab and
slide the guides to the paper size required.
6 Adjust the paper length guide to the paper size required.
Paper Size Dial
Paper Size Window
Note When the Paper Size Dial is set to Other the paper size
must be set into the printer on the operation panel. Refer to
Cassette (1 to 5) Set. (Settings for the cassettes) on page 4-
28.
Paper Width
Adjusting Tab
Paper Width
Guides
Note Paper sizes are marked on the cassette.
Paper Length Guide
Paper Length
Adjusting Tab

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s