Kyocera FS-2100DN User Manual

Operation Panel
4-32
1 In the Cassette # Set. menu, press U or V to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
2 Press [OK]. The Custom PaperSize menu screen appears.
3 Press U or V to select Measurement.
4 Press [OK]. The Measurement menu screen appears.
5 Press U or V to select the paper size units and then press [OK]. The
unit for entering the paper size is set and the Custom PaperSize
menu screen reappears.
6 Press U or V to select Size Entry(Y).
7 Press [OK]. The Size Entry(Y) menu screen appears.
8 Use the numeric keys or press U or V to enter the paper length.
The range of paper lengths you can set for each cassette is as
follows:
• Cassette (FS-2100D, FS-2100DN):
210 to 356 mm (8.25 to 14.02 inches)
• Cassette (FS-4100DN, FS-4200DN, FS-4300DN):
148 to 356 mm (5.83 to 14.02 inches)
• Paper Feeder PF-320:
162 to 356 mm (6.38 to 14.02 inches)
9 Press [OK]. The entered paper length is set and the Custom
PaperSize menu screen reappears.
10 Press U or V to select Size Entry(X).
11 Press [OK]. The Size Entry(X) menu screen appears.
Cassette 1 Set.: a b
********************-
2 Other Paper Size
3 Custom PaperSize
[ Exit ]
1 Media Type
Custom PaperSize: a b
********************-
2 Size Entry(Y)
3 Size Entry(X)
[ Exit ]
1 Measurement
Measurement: a b
********************-
2 mm
1 *inch
Size Entry(Y): a b
(5.83 - 14.02)
/14.02- "
Size Entry(X): a b
(4.13 - 8.50)
/*8.50- "

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s