4-33
Operation Panel
12
Use the numeric keys or U or V to enter the paper width.
The range of paper widths you can set for each cassette is as follows:
• Cassette (FS-2100D, FS-2100DN):
140 to 216 mm (5.5 to 8.5 inches)
• Cassette (FS-4100DN, FS-4200DN, FS-4300DN):
105 to 216 mm (4.13 to 8.5 inches)
• Paper Feeder PF-320:
92 to 216 mm (3.62 to 8.5 inches)
13
Press [OK]. The entered paper width is set and the Custom
PaperSize menu screen reappears.
14
Pressing [Exit] ([Right Select]) returns to the Ready to print
screen.
Media Type (Setting the cassette paper type)
To set the paper type for the paper cassette, refer to Media Type (Setting the cassette paper type) on page 4-29.
Bulk Feeder Set. (Settings for the optional bulk paper feeder)
To print correctly on paper supplied from the optional bulk paper feeder, use the procedure below to set the paper size and
media type.
The options available in Bulk Feeder Set. menu are as follows:
• Paper Size (Paper size setting for the optional bulk paper feeder)...4-33
• Media Type (Paper type setting for the optional bulk paper feeder)...4-34
Paper Size (Paper size setting for the optional bulk paper feeder)
You can use this to set the paper size that can be supplied from the optional bulk paper feeder.
1 In the Paper Settings menu, press U or V to select Bulk
Feeder Set..
2 Press [OK]. The Bulk Feeder Set. menu screen appears.
3 Press U or V to select Paper Size.
4 Press [OK]. The Paper Size screen appears listing the paper sizes
that can be supplied from the bulk paper feeder.
The available paper sizes are as follows:
Envelope Monarch
Envelope #10
Envelope DL
Envelope C5
Executive
Letter
A4
B5
Note Bulk Feeder Set. is displayed only when the optional bulk paper feeder is installed on the printer.
To Next Page
Loading...
Need help?
General
