2DC
1-4-1
1-4-1 Maintenance mode
The copier is equipped with a maintenance function which can be used to maintain and service the machine.
(1) Executing a maintenance item
Start
Enter the number of the maintenance
item to be executed using the copy
exposure adjustment keys or the zoom
+/- keys.
Press the start key.
Press the stop/clear key.
The maintenance item is run.
Press the stop/clear key.
Enter 001 using the copy exposure
adjustment keys or the zoom
+/- keys, and press the start key.
End
· · · · · · · Entering the maintenance mode
· · · · · · · Selecting a maintenance item
· · · · · · · Exiting the maintenance mode
Yes
No
No
Run another maintenance
mode?
Yes
Run the item again?
Press the stop/clear key, start key
and the left copy exposure adjustment
key in the order presented and hold
them down.
To Next Page
Loading...
