Kyocera KM-1500

PRESCRIBE Command Reference
114
FSET — change current Font SETting by
characteristic
Format
FSET spacing-pitch-height-style-weight-typeface;
Parameters
spacing:
fixed or proportional spacing, followed by a terminator P:
0 = fixed font
1 = proportional font
pitch:
pitch in cpi, from 0.44 to 99.99 cpi (ignored in a proportional font), followed by a
terminator H
height:
the line-to-line spacing in points from 0.25 to 999.25; followed by a terminator V
style:
upright or italic, followed by a terminator S:
0 = upright
1 = italic
4 = condensed
5 = condensed italic
weight:
degree of bolding, -7 to +7; followed by a terminator B:
-7 = Ultra thin
-6 = Extra thin
-5 = Thin
-4 = Extra light
-3 = Light
-2 = Demi light
-1 = Semi light
0 = Medium
1 = Semi bold
2 = Demi bold
3 = Bold
4 = Extra bold
5 = Black
6 = Extra black
7 = Ultra black