Kyocera KM-1500

PRESCRIBE Command Reference
240
RWER D — [Read/Write External Resource] Delete
data on external media
Format
RWER D, medium, data-type, ’partition-name’;
Parameters
medium:
0 = hard disk or RAM disk
A = memory card
data-type:
type of data to be deleted
1 = Font data
2 = Printable data
16 = Macro data
112 = File data
128 = API data (downloadable program)
partition-name:
Name of partition from which data is deleted
Function
The RWER D command deletes data on any external media whether it is a memory card
or the hard disk. This command has no effect if the media has been write protected using
KPDL or PJL.
The partition name may be a maximum of 15 printable ASCII characters (20H through
7EH); upper and lower case letters are regarded distinct. A partition name may not have
leading spaces, and in the command, the partition name must be enclosed in single or
double quotation marks.
A partition list is not automatically printed when deleting data on external media, even
though the automatic printing of partition information was enabled (by the RWER I
command). ( See page 244.)
A command error results and the command has no effect if parameters other than the
above are used.
This command causes a page break.