Kyocera KM-1500

PRESCRIBE Command Reference
60
COPY — set number of COPIES
Format
COPY number;
Parameter
number:
number of copies
Function
The COPY command designates the number of copies for each page in a print job. This
copy count value can be changed by sending the printing system another COPY
command or by issuing a reset command. For best results, place the copy command near
the start of a job or at the top of a page. If two or more copy commands are placed on the
same page, the last one will be recognized.
File
!R! RES;
SLM 0.5;
UNIT P;
SFNT ’Helvetica-Bd’, 14.4;
SLS 17;
COPY 3;
EXIT;
Announcement
Party Tonight at 6:00
!R! PAGE; EXIT;