Kyocera KM-1500

SLPI
305
SLPI — Set Lines Per Inch
Format
SLPI number;
Parameter
number:
Number of lines per inch
Function
The SLPI command sets the number of lines per inch (even if the UNIT command
designates a non-inch unit).
File
!R! RES; STM 2;
SFNT "Helvetica";
EXIT;
These lines have the
default spacing of
six lines per inch.
!R! SLPI 2; EXIT;
These lines are
spaced at two lines
per inch.
!R! PAGE; EXIT;
Printout
Related Command
SLS