Kyocera KM-1500

STR
339
STR — SeT dot Resolution
Format
STR dot-resolution;
Parameter
dot-resolution:
75, 100, 150, 200, 300, 600, or 1200
Function
The STR command sets the dot resolution for raster graphics to 75, 100, 150, 200, 300,
600, or 1200 dots per inch. The 200, 600, and 1200 dpi resolutions are available only for
the printing system models that support the 600 or 1200 dpi printing resolution. The
default value is 75 dots per inch.
The STR command affects only PRESCRIBE raster graphics. It does not change the
resolution of vector graphics commands or HP LaserJet raster graphics.
The following diagrams show examples of printing a raster graphics data using different
dot resolution.
75 d
p
i
reso
l
u
ti
on
(Default)
100 dpi resolution
150 dpi resolution
200 dpi resolution
300 dpi resolution
600 dpi resolution
1200 dpi resolution