Kyocera KM-1500

GPAT
121
GPAT — set Gray PATtern
Format
GPAT gray-level;
Parameter
gray-level:
any number from 0 (black) to 1 (white)
Function
The GPAT command specifies the shade of gray for painting a block in both the standard
mode and path mode graphics. Numbers with up to four decimal places are accepted.
The default value is 0 (solid black).
The printer recognizes a dot in the pattern as having the size of 1/300 inch in the 300 dpi
resolution, and 1/600 inch in the 600 dpi resolution, and 1/1200 inch in the 1200 dpi
resolution. For printer models that support 600/1200 dpi resolution printing, the default
resolution generated by the GPAT command is 300 dpi; however, 600/1200 dpi can be
selected using the FRPO B8 command. See Section 6.2. of the Technical Reference
manual (FRPO B8).
File
!R! RES; UNIT C;
MCRO GP;
NEWP;
GPAT %1;
PDRP 2, 0, 0, 2, -2, 0, 0, -2;
FILL 1;
PMRP .5, .5;
ENDM;
CALL GP,0;
CALL GP,.125;
CALL GP,.25;
CALL GP,.375;
CALL GP,.5;
CALL GP,.625;
CALL GP,.75;
CALL GP,.875;
PAGE;
EXIT;