Kyocera KM-1500

RWER F
241
RWER F — [Read/Write External Resource]
Format external media
Format
RWER F, medium;
Parameter
medium:
0 = hard disk
A = memory card
Function
The RWER F command formats any external media whether it is a memory card or the
hard disk. The hard disk is physically formatted when it is specified. This command has
no effect if the media has been write-protected using KPDL or PJL.
A command error results and the command has no effect if parameters other than the
above are used.
This command causes a page break and prints a format information page (if the medium
is a compact flash card) when executed.