PRESCRIBE Command Reference
242
RWER I — [Read/Write External Resource]
automatically print partition Information
Format
RWER I, mode;
Parameter
mode:
control mode:
E = Enable automatic printing of partition information
D = Disable automatic printing of partition information
Function
The RWER I command toggles the automatic printing of partition lists for any external
media whether it is a memory card or the hard disk. With the automatic printing of
partition lists enabled (RWER I, E;), the printing system prints partition lists whenever
data are written to external media.
The setting made with this command returns to default when the power is turned off.
A command error results and the command has no effect if parameters other than the
above are used.
To Next Page
Loading...
