Kyocera KM-2020

2C9
1-5-12
Problem Causes/check procedures Corrective measures
(16)
A paper jam in the
feedshift section is
indicated during
copying (misfeed in
the feedshift sec-
tion).
Jam code 52
(17)
A paper jam in the
duplex section is
indicated during
copying (misfeed in
duplex paper con-
veying section).
Jam code 60
(18)
A paper jam in the
duplex section is
indicated during
copying (misfeed in
duplex exit section).
Jam code 61
Broken feedshift switch
actuator.
Defective feedshift switch.
Check if the exit motor
malfunctions.
Electrical problem with the
exit motor.
Broken feedshift switch
actuator.
Defective feedshift switch.
Broken duplex paper con-
veying switch actuator.
Defective duplex paper
conveying switch.
Check if the exit motor
malfunctions.
Electrical problem with the
exit motor.
Check if the duplex feed
clutch malfunctions.
Electrical problem with the
duplex feed clutch.
Broken duplex paper con-
veying switch actuator.
Defective duplex paper
conveying switch.
Broken registration switch
actuator.
Defective registration
switch.
Check if the duplex feed
clutch malfunctions.
Electrical problem with the
duplex feed clutch.
Check visually and replace the feedshift switch if its actuator is
broken.
Run maintenance item U031 and turn feedshift switch on and off
manually. Replace feedshift switch if indication of the corre-
sponding switch is not light.
Run maintenance item U030 and select the exit motor to be
turned on and off. Check the status and remedy if necessary.
Check (see page 1-5-28).
Check visually and replace the feedshift switch if its actuator is
broken.
Run maintenance item U031 and turn feedshift switch on and off
manually. Replace feedshift switch if indication of the corre-
sponding switch is not light.
Check visually and replace the duplex paper conveying switch if
its actuator is broken.
Run maintenance item U031 and turn duplex paper conveying
switch on and off manually. Replace duplex paper conveying
switch if indication of the corresponding switch is not light.
Run maintenance item U030 and select the exit motor to be
turned on and off. Check the status and remedy if necessary.
Check (see page 1-5-28).
Check visually and remedy if necessary.
Check.
Check visually and replace the duplex paper conveying switch if
its actuator is broken.
Run maintenance item U031 and turn duplex paper conveying
switch on and off manually. Replace duplex paper conveying
switch if indication of the corresponding switch is not light.
Check visually and replace the registration switch if its actuator
is broken.
Run maintenance item U031 and turn registration switch on and
off manually. Replace registration switch if indication of the cor-
responding switch is not light.
Check visually and remedy if necessary.
Check.