System Menu
7-27
Prioritizing Copying Over Printing
Prioritize copy jobs over printer jobs in the job output queue. The setting items are as follows.
1
Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2
Press [S] or [T] to select Copy Job Priority and press [Change #].
3
Select [Off] or [On].
4
Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Erasing Hard Disk Contents
When the optional security kit is installed, select the hard disk overwrite method from [Once
Overwrite] or [3-time Overwrite]. For further details about the hard disk overwrite method, refer to
the optional security kit Operation Guide.
NOTE: This setting is available when optional security kit is installed.
1
Referring to Accessing the Machine Default Screen on page 7-13, access the Machine Default
screen.
2
Press [S] or [T] to select Hard Disk Overwrite and press [Change #].
3
Select [3-time Overwrite] or [Once Overwrite].
4
Press [Close] to save settings or [Back] to cancel settings. The display returns to the Machine
Default screen.
Setting Hard Disk Encryption Key
When the optional security kit is installed, you can specify an encryption key. For further details
about encryption keys, refer to the optional security kit Operation Guide.
NOTE: This setting is available when the optional security kit is installed.
1
Referring to Accessing the Machine Default Screen on page 7-13, open the Machine Default
screen.
2
Press [S] or [T] to select HDD Encryption Key and press [Change #].
3
Press [Change #] for Encryption Key.
4
Enter a 16 character encryption key and press [End].
Refer to Character Input Method on page 7-47 for how to enter text characters.
5
To confirm the entry, press [Change #] under Confirm Encryption Key, enter the same key again,
and press [End].
Item Description
Off Do not prioritize copy jobs in the job output queue.
On Prioritize copy jobs in the job output queue and print them before
printer jobs.
To Next Page
Loading...
Need help?
General
