Job Accounting
8-3
Accessing the Job Accounting Screen
Set up Job Accounting from the Job Accounting screen. Follow the steps below to access the Job
Accounting screen.
1
Press the System Menu/Counter key.
2
Press [Job Accounting].
3
Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the
25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model.
If the correct code has been entered, the Job Accounting screen will be displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/25 ppm model, 32003200 for the 32/25 and 32/32 ppm models and
40004000 for the 40/35 ppm model.
4
Refer to the following configuration items to configure the default settings.
System Menu / Counter
System Menu
Default
Copy
Language
Accounting
Job
Default
Scanner
Default
Machine
Default
Printer
Setting
MP tray
Management
BOX
Management
Document
Orig. Size
Register
Report
Print
To Next Page
Loading...
Need help?
General
