System Menu
7-29
Setting MP Tray
Set the paper size and paper type to match paper loaded in the MP tray.
Specifying the Paper Size to the MP Tray
The MP tray paper size setting method and available paper sizes are as follows.
NOTE: For further details on MP tray size setting, refer to Specifying the Paper Size to the MP Tray
in Chapter 2 of Operation Guide.
Specifying the Paper Type to the MP Tray
The following paper types can be specified for the MP tray.
Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color
(Colour), Prepunched, Letterhead, Thick paper, Envelope, Coated, High Quality, Custom 1 - 8
NOTE: For further details about MP tray paper type setting, refer to Specifying the Paper Type to
the MP Tray in Chapter 2 of Operation Guide.
Setting method Unit Paper size
Auto Detect Inch 11 × 17", 8
1/2 ×14", 11×81/2", 8 1/2 ×11", 51/2 ×81/2"
Centimeter A3, B4, A4, A4R, B5, B5R, A5R, B6R, A6R
Other Standard Sizes ISO B5, Envelope DL, Envelope C5, Envelope C4, Comm. #10,
Comm. #9, Comm. #6-3/4, Monarch, Executive, OUFUKU
HAGAKI (return postcard), YOUKEI 2, YOUKEI 4, 8
1/2 ×131/2",
8
1/2 × 13" (Oficio 2), 8K, 16K, 16KR
Input Size Inch models
Height: 3 7/8 - 11 5/8" (1/8" increments)
Width: 5
7/8 - 17" (1/8" increments)
Metric models
Height: 98 - 297 mm (1 mm increments)
Width: 148 - 432 mm (1 mm increments)
Custom Size Pre-assigned paper size 1-4
Assignable paper sizes
Inch models
Height: 3
7/8 - 11 5/8" (1/8" increments)
Width: 5
7/8 - 17" (1/8" increments)
Metric models
Height: 98 - 297 mm (1 mm increments)
Width: 148 - 432 mm (1 mm increments)
To Next Page
Loading...
Need help?
General
