Kyocera TASKalfa 180 - Deleting Department ID Codes

Job Accounting
OPERATION GUIDE 6-5
6
Deleting Department ID Codes
Deleting a registered Department ID Code.
1 Display Job Accounting. (Refer to Job Accounting
Operation Procedures on page 6-3.)
2 Press or to select display 03.Delete
code, and then press the OK key.
3 Enter the Department ID Code to be deleted using
the numeric keys.
NOTE: If a mistake is made during input it can be
cleared by pressing the Stop/Clear key and the value
reentered.
4 Confirm the code to be deleted, and then press the
OK key.
5 Press or to select Yes, and then press the
OK key.
The display will return to that of Step 2.
Job Accounting:
03.Delete code