Copying Functions
4-4 OPERATION GUIDE
Selecting Image Quality
The Image Quality can be selected to match the type of original to be copied. Press the Image Quality
Selection key to light up the Image Quality Mode to be used.
The table below shows the quality options.
NOTE: The Image Quality Mode selected in the System Menu can be changed. (Refer to Original Image
Quality on page 5-9.)
The density of each of the Image Quality Modes can be adjusted. (Refer to Text + Photo Mode Density
Adjustment on page 5-11, Photo Density Adjustment on page 5-11 and Text Density Adjustment on page 5-12.)
When horizontal lines stand out in Photo Mode, select Dithering (Refer to Photo Processing on page 5-12).
Note, however, that the images will be rougher when Dithering is used.
Image quality mode Description
Text + Photo For originals with both text and photographs.
Text For originals primarily consisting of text.
Photo For photos taken with a camera.
To Next Page
Loading...
