Kyocera TASKalfa 180 - Auto Density Adjustment; Photo Density Adjustment; Text + Photo Mode Density Adjustment

System Menu
OPERATION GUIDE 5-11
5
3 Press or to select 1 Step, or 0.5 Step,
and then press the OK key.
The display will return to that of Step 2.
Auto Density Adjustment
Adjusts the overall density of the copy when Auto Exposure Mode is used.
1 Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2 Press or to select an density from 1 to 7, and
then press the OK key.
3 Press or to select Text+Ph Dens, Photo
Density or Text Density, and then press the
OK key.
The display will return to that of Step 2.
Text + Photo Mode Density Adjustment
Adjusts the median density value of the copy for the Text + Photo original.
1 Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2 Press or to select select 08.Text+Ph
Dens, and then press the OK key.
3 Press or to select an density from 1 to 7, and
then press the OK key.
The display will return to that of Step 2.
Photo Density Adjustment
Adjusts the median density value of the copy for the Photo original.
1 Display the System Menu. (Refer to System Menu
Operation Procedures on page 5-7.)
2 Press or to select select 09.Photo
Density, and then press the OK key.
3 Press or to select an density from 1 to 7, and
then press the OK key.
System Menu:
07.Auto Density
System Menu:
08.Text+Ph Dens
System Menu:
09.Photo Density