Preparation before Use
OPERATION GUIDE 2-7
2
4 Press the OK key.
The display will blink and copying starts.
Loading Paper in the MP Tray
In addition to standard paper and recycled paper, special paper (45 to 160 g/m
2
) can also be loaded.
Up to 100 sheets of standard (80 g/m²) A4/Letter size paper (50 sheets of A5R, A6R, Statement-R, 25 sheets of
the other sizes) can be set. The paper sizes that can be used are: Ledger R to Statement, A3 to B6R, A6R,
Oficio 2, Cardstock, Folio R, 8K, 16K, 16KR, Executive, ISO B5, Envelope #10, Envelope #9, Monarch,
Envelope #6.75, Envelope C5, Envelope C4, Envelope DL, OuhukuHagaki, Youkei 2gou and Youkei 4gou.
When making copies onto special paper, always use the MP tray.
IMPORTANT: When using the MP tray, set the paper size and type. (Refer to MP Tray Size and Media Type on
page 2-11.)
This can also be set in the System Menu. (MP Tray Size and Media Type on page 2-11)
When using non-standard size paper, register the paper size as Custom. (Refer to Specifying Custom Paper
Size on page 2-12.)
When loading the thick paper heavier than 106 g/m
2
, select Thick Paper as the Paper Type.
The capacity of the multi purpose tray is as follows.
• Color paper: 100 sheets
• Hagaki: 15 sheets
• Thin paper/thick paper (45 to 160 g/m
2
): 100 sheets to 5 sheets (the number of sheets differs depending on
paper size and thickness)
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Monarch, Youkei 4, Youkei 2: 5 sheets
1 Open the multi purpose tray.
NOTE: Pull out the MP tray extension to match the
paper size. Refer to the label which sealed inside the
machine when opening the MP tray.
To Next Page
Loading...
