Copying Functions
OPERATION GUIDE 4-23
4
Split Copying
Copy books, magazines, etc. with two facing pages of an open-faced original onto separate sheets of paper.
Two-sided to One-sided
Copies each side of a two-sided original onto two
individual sheets. The optional document processor is
required.
Book to One-sided
Produces a 1-sided copy of a 2-sided or open book
original.
The procedure for using two-sided/duplex copying is explained below.
1 Place the originals on the platen.
2 Press [Split], select the type of original, and select
or to light up the corresponding
display.
3 Press Start to start scanning.
If the originals have been set in the optional
document processor, copying starts automatically.
If the original has been set on the platen, a
message prompting replacement of the original is
displayed. In this case, proceed to the next step.
4 Replace the original and press the Start key.
Scanning of the original is performed.
5 After scanning all originals, press the OK key to
start copying.
To Next Page
Loading...
