Basic Operation
OPERATION GUIDE 3-3
3
Low Power Mode and Auto Low Power Mode
Low Power Mode
To activate Low Power Mode, press the Energy Saver key. The Energy Saver indicator lights and --- is
displayed on the No. of Copies/Zoom Display to save power except the Energy Saver indicator. This status is
referred to as Low Power Mode.
If print data is received during Low Power Mode, the machine automatically wakes up and starts printing.
To resume, perform one of the following actions. The machine will be ready to operate within 10 seconds.
• Press any key on the operation panel.
• Open the original cover or the optional document
processor.
• Place originals in the optional document processor.
Note that ambient environmental conditions, such as
ventilation, may cause the machine to respond more
slowly.
Auto Low Power Mode
Auto Low Power Mode automatically switches the machine into Low Power Mode if left idle for a preset time.
The default preset time is 1 minutes.
To Next Page
Loading...
