Preparation before Use
OPERATION GUIDE 2-11
2
MP Tray Size and Media Type
Adjust the paper in the MP Tray, register the paper size using the Operation Panel and specify the media type.
Selecting a Size from Regular Sizes
1 Press the Paper Selection key for 3 seconds.
The System Menu will be displayed.
2 Press or repeatedly until 23.MPTray
Config appears, and press
the OK key.
In the case of the selection of Other Standards or
Custom Size, proceed to Selecting a Size from
Other Regular Sizes on 2-11 or Entering Custom
Sizes on 5-15.
IMPORTANT: Use the illustration as a reference when
setting the paper in the ## R in the MP Tray.
3 Press or to select the paper size, and press
the OK key
.
4 Press or to select the media type, and press
the OK key
.
The display will blink and the copier will return to
the System menu.
5 Press or to select 00.Setting done, and
press the OK key.
The display will blink and copying starts.
Selecting a Size from Other Regular Sizes
1 Select the Other Standards. (Refer to Selecting a
Size from Regular Sizes on page 2-7.), and press
the OK key
.
2 Press or select the paper size, and press the
OK key
.
The paper size displayed are as shown below.
Inch specifications:
A3 R, A4 R, A4, A5 R, A6 R, B4 R, B5 R, B5, B6 R,
Folio R, Oficio 2, Executive, ISO B5, Envelope #10,
To Next Page
Loading...
